Axle measurement of 5G/3C device
(Precision-Type:TIMI 12P/ 30P; Auto-Type: TIMI 12A/ 30A)
Over 20-dimension of a tiny turning-milling axle measured within 20 seconds.
The tiny turning axle is often milled in different angle dimensions. The measurement of more than 20 sizes can be completed within 20 seconds with high repeatability and reproducibility.
Background of the Application
The axles of electronic devices like those of 5G/3C products are mostly tiny turning & milling composite parts. The difficulty of measurement lies in searching the datum line of different segments or angles. Full-dimension measurement usually takes tens of minutes by using traditional methods or gauges, such that an all-in-one measuring system is needed.
Solution
Using TIMI-series precision type or automatic type is able to rotate and position the precise angle for automatic measurement. Then it becomes simple to automatically measure the physical dimensions and cross-sectional contour.
Features
Automatically rotate and position the angle, whose rotating and the resolution is up to 0.02 degrees.
Overlay comparison of multi-level cross-sectional contour.
Complete the measurement of more than 20 sizes within 20 seconds.
Benefits
In tradition, using manual measuring gauges will cause higher individual measurement variation and uncertainty. TIMI-series measuring machine is totally computerized, which performing higher repeatability and reproducibility.
- Measurment Application
Precision-Type Telecentric Image Measuring Machine
(Models: TIMI 60P, TIMI 40P, TIMI 30P)
Looking for a solution to measure longer turned and ground shafts or those requiring high precision?...
Details
Auto-Type Image Measuring Machine
Auto-Type Image Inspection Machine is suitable for measuring turned parts, screw fasteners, and ground shafts without a center hole. (TIMI 12A,TIMI 30A,TIMI 40A,,TIMI 60A)
The Auto-Type Image Measuring Machine can inspect the shaft dimensions of cold-forged, centerless-ground,...
Details
Download 
